go-delve/delve
Documented errors, page 5 of 6. Back to go-delve/delve
| Code / Message | Type | Severity | Tags |
|---|---|---|---|
| could not read DWARF function entry | exception | error | dwarf, defer, evalscope, debug-info |
errLogstrWithoutLog --log-output specified without --log | validation | error | cli-flags, logging |
| invalid interface type | exception | error | delve, interface, runtime, dwarf |
| not enough arguments | exception | error | debugger, function-call-injection, arguments |
| argument of dlv_command is not a string | validation | error | starlark, scripting, type-error |
| interface conversion | exception | error | debugger, go, interface, nil, type-assertion |
| not enough arguments to | exception | error | debugger, go, function-call, argument-count |
| procstat_open_sysctl failed | exception | error | freebsd, procstat, entry-point, permissions |
| unable to clear breakpoint | exception | error | go, debugger, breakpoint, clear-failed |
| could not get argument location of | error_code | error | go, debugger, dwarf, location-expression, call-injection |
| can not compare to nil | exception | error | debugger, expression-evaluation, nil |
| no FDE for uprobe PC %#x | exception | error | ebpf, dwarf, unwind, breakpoints |
| selected goroutine not running | exception | error | go, function-call, goroutine, state |
| could not create stdout file | exception | error | dap, launch, file-io |
| eBPF map not loaded | error_code | error | ebpf, linux, bpf-map, tracing |
| could not attach to | exception | error | darwin, attach, mach, permissions |
| could not find DIE for function | error_code | error | go, debugger, dwarf, call-injection |
| Malformed breakpoint location, no line offset specified | exception | error | breakpoints, location-spec |
| nil can not be dereferenced | exception | error | go, debugger, nil-pointer, dereference |
| thread does not exist | exception | error | delve, debugger, thread-management, stale-id, process-control |
| unsupported operating system | exception | critical | platform, operating-system, elf, pe, macho |
| could not find label | validation | error | dap, configuration, pprof |
| no output path specified | validation | error | cli, missing-argument, delve |
| unsupported expression type | exception | error | dap, type-error, memory-inspection, delve |
| could not raise mach exception | exception | error | darwin, mach-exception, halt, stale-port |
| %s:%d:%d: %v | exception | info | go, starlark, error-decoration, diagnostics |
| error loading binary info from Go runtime | exception | error | go, pclntab, panic-recovery, binary-info, runtime-symbols |
| invalid argument 1 (type ) to complex | exception | error | debugger, go, expression-evaluation, complex-numbers, type-mismatch |
| can not convert constant | exception | error | debugger, expression-evaluation, type-conversion |
| could not find symbol in executable sections of binary | error_code | error | ebpf, uprobes, elf, address-translation |
| escape check for failed, variable unreadable | error_code | error | go, debugger, escape-analysis, unreadable-memory, call-injection |
| failed to set xstate | exception | error | freebsd, ptrace, registers, xsave, cgo |
| invalid argument (type ) to real | exception | error | debugger, go, expression-evaluation, type-mismatch |
| 3-index slice expressions not supported | exception | error | go, eval, slice, compile |
| could not get registers | exception | error | darwin, mach, registers, thread-exited, permissions |
| member data has no data member location attribute | exception | error | dwarf, member-location, missing-attribute |
| can not take address of | exception | error | debugger, expression-evaluation, address-of, compiler-optimization |
| could not read context | exception | error | delve, debugger, memory-read, core-dump, signal-handling, amd64 |
| can not convert value of type | exception | error | debugger, go, type-conversion, interface |
| unable to find locals: no debug information present in… | exception | error | go, debugger, stripped-binary, dwarf |
| wrong number of arguments for runtime.frame | error_code | error | debugger, eval, runtime-frame, argument-count |
| can not compare variables | exception | error | debugger, expression-evaluation, comparison |
| error reading thread note registers for thread | exception | error | core-dump, registers, truncated-file |
| first argument of write_file was not a string | validation | error | starlark, scripting, type-error |
| invalid typecast for Dwarf instructions | exception | error | dwarf, type-assertion, location-attribute |
| could not deliver signal: | error_code | error | darwin, signal, sigkill, process-exited |
| could not load one of the tables | error_code | error | go, maps, swiss-table, memory |
| could not load swiss map group elems | exception | error | go, debugger, dwarf, swiss-map |
| malformed stop packet | exception | error | gdb-serial-protocol, go, watchpoint, hex-decode |
| not valid | panic | error | amd64, registers, panic, not-implemented |
| unexpected response for vCont %c | exception | error | gdb-serial-protocol, go, vcont, unsupported-response |
| unknown argument to exit | exception | error | terminal, cli, exit |
| invalid length | exception | error | debugger, go, string, corrupt-memory |
| must specify at least one argument for qRRCmd | panic | error | gdbserial, rr, panic, argument-validation |
| bad swiss map type, group type lacks some required fields | error_code | error | go, maps, swiss-table, dwarf |
| can not watch | exception | error | debugger, watchpoints, go, variables |
| eBPF disabled | error_code | error | ebpf, elf, build-tags |
| unsupported location expression for argument | error_code | error | go, debugger, dwarf, location-expression, call-injection |
| wrong argument to "config debug-info-directories" | validation | error | cli, configuration, invalid-argument |
ErrTypeNotFound no type entry found, use 'types' for a list of valid types | exception | error | dwarf, type-not-found, debug-info |
| needs to be followed by an expression | validation | error | cli, argument-parsing, delve |
| unknown config parameter | validation | error | terminal, config, delve |
| unsupported location expression for argument | error_code | error | go, debugger, dwarf, dwop-piece, call-injection |
| follow exec not supported | exception | error | gdbserial, follow-exec, unsupported-feature |
| breakpoint name can not be a number | validation | error | breakpoint, validation, naming |
| cannot restart process Delve did not create | error_code | error | go, rpc, debugger, restart, attach |
| malformed qfThreadInfo response | exception | error | gdbserial, protocol, thread-info, compatibility |
| must be followed by an argument | validation | error | cli, argument-parsing, delve |
| too many arguments to "config substitutePath" | validation | error | dap, config, substitute-path |
| failed to get FP registers | exception | error | freebsd, ptrace, floating-point, registers, thread-exited |
| malformed stop packet | exception | error | gdb-serial-protocol, go, stop-packet, protocol-mismatch |
| can not assign big integer to %T. | exception | error | starlark, delve, scripting, integer-overflow |
| can not disable watchpoints | error_code | error | watchpoint, breakpoint, unsupported-operation |
| count == 0 not allowed with a channel filter | validation | error | go, rpc, goroutines, paging, validation |
| error accessing swiss map slot | exception | warning | go, maps, swissmap, variables |
| Could not read byte | panic | critical | dwarf, panic, frame-parsing |
| could not find target | exception | error | dap, multiprocess, target-switch |
| unknown argument | validation | error | go, starlark, rpc, argument-validation |
| Could not attach to pid | exception | error | linux, yama, ptrace-scope, permissions |
| could not create symbol table from | exception | error | go, elf, pclntab, symbol-table |
| could not find register | exception | critical | gdbserial, handshake, register, target-xml |
| expected argument after -size | validation | error | dap, argument-parsing, cli |
| thread already exited | exception | error | linux, ptrace, race-condition, threading |
| unrecognized option | exception | error | terminal, display, cli |
| reading name | exception | error | core-dump, elf-notes, io-error |
| could not read string len | exception | error | debugger, go, string, memory-read |
| empty OP stack | exception | error | dwarf, empty-stack, expression-evaluation |
| qMemoryRegionInfo response wrapped around the address space… | exception | error | gdbserial, memory-map, protocol, qmemoryregioninfo |
| is not a core file | exception | error | core-dump, elf-format, wrong-file-type |
| can not parse checkpoint response | exception | error | gdbserial, checkpoint, gdb-remote, parsing |
| error setting argument | exception | error | starlark, delve, scripting, type-conversion |
| procstat_getauxv failed | exception | error | freebsd, procstat, auxv, entry-point |
| unknown argument to 'target follow-exec | validation | error | dap, command-args, follow-exec |
| eBPF is disabled | error_code | error | ebpf, build-tags, platform-support, tracing |
| Invalid type in slice array | exception | error | delve, dwarf, slice, variables |
| unknown target command | validation | error | dap, command-args, repl |
| invalid argument 2 (type ) to complex | exception | error | debugger, go, expression-evaluation, complex-numbers, type-mismatch |
| Neither DELVE_EDITOR or EDITOR is set | validation | error | terminal, environment, editor |
| unknown CPU register type conversion to | exception | error | delve, registers, types, conversion |
| operator can not be applied to "nil | exception | error | debugger, expression-evaluation, nil |