embassy-rs/embassy
Documented errors, page 3 of 3. Back to embassy-rs/embassy
| Code / Message | Type | Severity | Tags |
|---|---|---|---|
| When the MSI is used as cpu/system bus clock or clock… | panic | error | rust, embedded, rcc, msi, stm32n6, clock-config |
| Selected PCLK2 frequency is too high for ADC with largest… | panic | error | embedded, stm32, adc, clock-config, rust |
| timer must be stopped before setting counter | panic | error | rust, embedded, rp2040, timer, rtc, state-error |
| Embassy is configured as dual-bank, but the hardware is… | panic | error | rust, embassy, embedded, stm32, flash, build-configuration |
| Read corruption for stm32f42xxG and stm32f43xxG in dual… | panic | critical | rust, embassy, embedded, stm32, flash, hardware-errata |
| the hub change must be taken before a port change is taken | panic | error | embedded, usb, usb-host, state-machine, panic |
| The last block has already been processed! | panic | error | embedded, crypto, cryp, panic, invalid-state |
| Could not find SWD pin to cfg gate | panic | error | build-script, embedded, gpio, panic, rust |
| LSE is not configured, but selected for time_driver!!! | panic | error | rust, embedded, rcc, lse, time-driver, panic |
| PanicRawMutex locked from multiple contexts | panic | critical | embedded, concurrency, mutex, panic |
| APS6404L PSRAM verification not implemented for RISC-V | panic | error | rust, embedded, riscv, psram, unimplemented |
| Flexable pixels are not yet implemented | panic | error | rust, embedded, graphics, unimplemented |
| IC source was set to PLL , but it is not currently enabled | panic | error | rust, embedded, rcc, stm32n6, clock-config, panic |
| Source must be equal across all enabled PLLs. | panic | error | rust, embedded, rcc, pll, stm32h7 |
| The LCD driver needs the RTC/LCD clock to be running | panic | error | rust, embedded, stm32, lcd, rcc, clock-config |
| Context switching only supported on ARM | panic | error | embedded, arm, platform, stm32 |
| Endpoint memory full | panic | error | embedded, stm32, usb, memory, endpoint, panic |
| Invalid watchdog scratch index | panic | error | embedded, rp2040, watchdog, argument |
| OTP not present | panic | error | flash, otp, stm32, runtime-panic |
| When the HSI is used as cpu/system bus clock or clock… | panic | error | rust, embedded, rcc, hsi, stm32n6, clock-config |
| Bad 802.15.4 channel | panic | error | embedded, nrf, radio, ieee802154, range-check, panic |
| Invalid key size | panic | error | embedded, crypto, panic, key-size, aes |
| PLL1.P not configured | panic | error | embedded, rcc, pll, sai, panic |
| Clocks initialized, but clk_16k_vsys not active | panic | critical | embedded, rust, rtc, clocks, low-power |
| Input must be a multiple of | panic | error | embedded, crypto, aes, cbc, ecb, padding, panic |
| PLL should not be disabled / reconfigured if used for IC2… | panic | error | rust, embedded, rcc, pll, stm32n6, sysclock |
| overflow when multiplying duration by scalar | panic | error | arithmetic, duration, overflow, panic |
| CallFuture polled after completion | panic | error | embedded, rpc, async, future, panic |
| RpcService::run() must not be called concurrently | panic | error | embedded, rpc, concurrency, panic |
| When the HSE is used as cpu/system bus clock or clock… | panic | error | rust, embedded, rcc, hse, stm32n6, clock-config |
| Invalid channel to sample | panic | error | embedded, stm32, adc, rust |
| Multiple mspm0xx/mspsxx Cargo features enabled | panic | error | rust, build-script, cargo-features, conflict, embedded |
| SYS not supported yet | panic | error | rust, embedded, stm32, wba, rcc, sai, unimplemented |
| DTS PCLK frequency must be less than 127 MHz. | panic | error | embedded, rust, stm32, clock-config, dts |
| Could not find DEBUGSS peripheral | panic | error | build-script, embedded, debug, panic, rust |
| WatchdogChannels::All is not supported for AWD3; use… | panic | error | embedded, stm32, adc, watchdog, panic |
| Direct CSR command sending is not implemented for RISC-V yet | panic | error | rust, embedded, riscv, qmi, unimplemented |
| invalid max_packet_size_0, the allowed values are 8, 16, 32… | panic | error | embedded, usb, config, panic |
| DataLength > 8 | panic | error | embedded, can, panic, payload-size |
| The 'dual-bank' feature is not supported on this single… | panic | error | build-script, cargo-features, stm32, flash-config |
| psc division overflow | panic | error | tim, time-driver, embedded, panic, overflow |
| IC1 is not ready to be selected as CPU clock source | panic | error | rust, embedded, rcc, stm32n6, ic1, panic |
| Additional associated data must be processed first! | panic | error | embedded, crypto, aead, gcm, cryp, panic |
| HSE is not ready to be selected as system clock source | panic | error | rust, embedded, rcc, stm32n6, hse, sysclk, panic |
| AUDIOCLK not supported yet | panic | error | rust, embedded, stm32, wba, rcc, sai, audio, unimplemented |
| Invalid word size | panic | error | rust, embedded, dma, panic, word-size |
| Unsupported EP0 size | panic | error | embedded, usb, config, panic |
| Invalid channel for PWM input | panic | error | timer, pwm-input, embedded, panic |
| PLL is unavailable in voltage range 4 | panic | error | rust, embedded, stm32, rcc, pll, voltage-scaling |
| YCbCr pixel format not supported for background buffer | panic | error | embedded, rust, dma2d, graphics |
| QSPI address too large to be represented with the given… | panic | error | rust, embedded, stm32, qspi, overflow, validation |
| memory-to-memory transfers not implemented for GPDMA | panic | error | dma, embedded, stm32, unsupported-operation, memory-to-memory |
| HSI is not ready to be selected as CPU clock source | panic | error | rust, embedded, rcc, stm32n6, hsi, panic |
| QSPI address can't be sent with an address width of NONE | panic | error | rust, embedded, stm32, qspi, validation |
| Invalid HCLK frequency - should be at least 25 MHz. | panic | error | embedded, rust, ethernet, clock-config, stm32 |
| Hertz cannot be 0 | panic | error | time, clock, panic, stm32 |
| must not select RESERVED_1 source as DISABLE | panic | error | rcc, embedded, panic, clock-config |
| QSPI data can't be sent with a data width of NONE | panic | error | rust, embedded, stm32, qspi, validation |
| HSE is not ready to be selected as CPU clock source | panic | error | rust, embedded, rcc, stm32n6, hse, panic |
| QSPI data must be at least one byte | panic | error | rust, embedded, stm32, qspi, validation, empty-buffer |
| QSPI address is not set, so the address width should be NONE | panic | error | rust, embedded, stm32, qspi, validation |
| DataLength > 64 | panic | error | embedded, can-fd, panic, payload-size |
| Output buffer length must match input length. | panic | error | embedded, crypto, cryp, buffer-size, panic |
| MSI is not ready to be selected as system clock source | panic | error | rust, embedded, rcc, stm32n6, msi, sysclk, panic |
| PHY did not respond | panic | error | embedded, rust, ethernet, phy, hardware |